vaheeD khoshnouD

linux, mikrotik, macosx

Interface Bonding 802.3ad (LACP) with Cisco

Written by vaheeD on January 11, 2013
5.00 avg. rating (93% score) - 1 vote

Configuration Example:

802.3ad (LACP) with Cisco Catalyst GigabitEthernet Connection.

/inteface bonding add slaves=ether1,ether2 \
   mode=802.3ad lacp-rate=30secs \
   link-monitoring=mii-type1 \
   transmit-hash-policy=layer-2-and-3

Other part configuration (assuming the aggregation switch is a Cisco device, usable in EtherChannel / L3 environment):

!
interface range GigabitEthernet 0/1-2
   channel-protocol lacp
   channel-group 1 mode active
!
interface PortChannel 1
   no switchport
   ip address XXX.XXX.XXX.XXX XXX.XXX.XXX.XXX
!

Or for EtherChannel / L2 environment:

!
interface range GigabitEthernet 0/1-2
   channel-protocol lacp
   channel-group 1 mode active
!
interface PortChannel 1
   switchport
   switchport mode access
   swichport access vlan XX
!
5.00 avg. rating (93% score) - 1 vote

Posted Under: Cisco

About vaheeD

Leave a Reply

Your email address will not be published. Required fields are marked *

Protected by WP Anti Spam