vaheeD khoshnouD

linux, mikrotik, macosx

Completely HTPC with XBMCbuntu + TVHeadend + Tevii S660 + DVB T + PS3 Remote

Written by vaheeD on June 4, 2014
5.00 avg. rating (93% score) - 1 vote

First Step

Install XBMCbuntu 12 From this LINK

Next Step

OS tweaks …

# Fix SSH keys. All XBMCbuntu installs are shipped with same key.
# Which is bad m’kay?

/bin/rm /etc/ssh/ssh_host_*
dpkg-reconfigure openssh-server

# Set root password.

passwd root

# Allow sudo without password.

echo "%adm ALL=(ALL) NOPASSWD: ALL" >/etc/sudoers.d/nopassword
chmod 0440 /etc/sudoers.d/nopassword

# Clean files older than two # weeks from /tmp and
# autofix filesystem on boot after crash.

sed -i /etc/default/rcS -e's/^TMPTIME=.*/TMPTIME=14/g' \
-e's/^FSCKFIX=.*/FSCKFIX=yes/g'

# Enable TRIM for rootfs and swap

sed -i.bak /etc/fstab \
-e's/remount-ro/remount-ro,discard,commit=15/g' \
-e's/sw /sw,discard/g'

# Next we make sure existing packages are up-to-date and
# add few packages that aren’t included in stock install.
# Some of these are for making command line use easier
# while some are essential for later steps.

apt-get update
apt-get -y dist-upgrade
apt-get -y install joe screen lftp smartmontools samba \
locate telnet mtr python-dbus python-gobject traceroute \
aptitude htop vim-nox build-essential subversion cmake   \
libusb-1.0-0-dev libpcsclite-dev

# Disable IPv6 support

echo "net.ipv6.conf.all.disable_ipv6=1" >>/etc/sysctl.conf

# Disable bunch of unwanted services started by default

rm -f /etc/rc2.d/S19lirc
rm -f /etc/rc2.d/S50rsync
rm -f /etc/rc2.d/S70pppd-dns
echo manual >/etc/init/console-font.override
echo manual >/etc/init/cryptdisks-enable.override
echo manual >/etc/init/cryptdisks-udev.override
echo manual >/etc/init/tvheadend.override
echo manual >/etc/init/setvtrgb.override
echo manual >/etc/init/hybrid-gfx.override
echo manual >/etc/init/gssd.override
echo manual >/etc/init/gssd-mounting.override
echo manual >/etc/init/idmapd.override
echo manual >/etc/init/idmapd-mounting.override
echo manual >/etc/init/mountall-net.override
echo manual >/etc/init/portmap.override
echo manual >/etc/init/portmap-wait.override
echo manual >/etc/init/statd.override
echo manual >/etc/init/statd-mounting.override

# Allow wakeup from suspend using USB devices

cat <<'__EOF__' >/etc/rc.local
#!/bin/bash
# /etc/rc.local
#
# Enable USB wakeup, part 1
grep -e "USB.*disabled" /proc/acpi/wakeup |\
while read line; do
echo $line >/proc/acpi/wakeup
done
#
# Enable USB wakeup, part 2
for i in /sys/bus/usb/devices/*/power/wakeup; do echo "enabled" > $i; done
#
# Exit with success
exit 0
__EOF__

# More USB wakeup changes

cat <<'__EOF__' >/etc/usbwakeup-fixup.sh
#!/bin/bash
# /etc/usbwakeup-fixup.sh
(sleep 3; for i in /sys/bus/usb/devices/*/power/wakeup; do echo "enabled" > $i; done) &
__EOF__

# One more USB wakeup related change left

cat <<'__EOF__' >/etc/udev/rules.d/10-usb-wakeup.rules
# /etc/udev/rules.d/10-usb-wakeup.rules
ACTION=="add", SUBSYSTEM=="usb", IMPORT{program}="/bin/bash -c /etc/usbwake-fixup.sh"
__EOF__

# Ha! Fooled you! Still more USB wakeup. Promise this is last.

chmod a+x /etc/rc.local /etc/usbwakeup-fixup.sh

# Reload ath9k wlan drivers after suspend. This is needed as
# otherwise WLAN gets stuck at around 10Mbit/s instead of
# proper 300Mbit/s.

echo 'SUSPEND_MODULES="ath9k ath9k_hw ath9k_common"' >>/etc/pm/config.d/modules

 

Next Step

Install TVHeadend

 

If you had previously added the launchpad PPA, please be sure to remove it (as it no longer exists)

sudo apt-add-repository -r http://ppa.launchpad.net/adamsutton/tvheadend
sudo apt-get remove tvheadend

Before you can use the repositories you probably want to import the GPG signing key:

curl http://apt.tvheadend.org/repo.gpg.key | sudo apt-key add -

You will then need to add which ever repository you feel is most appropriate, for example if you want to be cautious and have a reliable system:

sudo apt-add-repository http://apt.tvheadend.org/stable
sudo apt-get update
sudo apt-get install tvheadend

now open http://youripaddress:9981

for enable time shift on tvheadend with xbmc go 1>Configuration 2>Recording 3>Timeshift
then all Checkbox in this page …

Next Step

Install Tevii S660

Download Drive from Tevii Site LINK

Extract Drive and Just copy two file 1>dvb-fe-ds3000.fw 2>dvb-fe-ds3103.fw 3>dvb-usb-s660.fw

wget http://www.tevii.com/Tevii_Product_20140130_media_build_b51.tar.bz2.rar
mv Tevii_Product_20140130_media_build_b51.tar.bz2.rar Tevii_Product_20140130_media_build_b51.tar.bz2
tar xjfv Tevii_Product_20140130_media_build_b51.tar.bz2.rar
sudo cp -rfv media_build/*.fw /lib/firmware/

now reboot the system and test with command

dmesg | grep -i dvb
[   10.719165] DVB: registering new adapter (Afatech AF9015 DVB-T USB2.0 stick)
[   10.904830] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[   11.036039] dvb-usb: found a 'TeVii S660 USB' in warm state.
[   11.036122] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[   11.036288] DVB: registering new adapter (TeVii S660 USB)
[   11.130885] DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[   11.154384] dvb-usb: MAC address: 00:18:bd:5c:47:ad
[   11.359287] DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
[   11.361022] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.4/usb1/1-4/input/input6
[   11.361218] dvb-usb: schedule remote query interval to 150 msecs.
[   11.361223] dvb-usb: TeVii S660 USB successfully initialized and connected.
[   11.411357] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.4/usb1/1-2/rc/rc0/input7
[   11.411470] rc0: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:10.4/usb1/1-2/rc/rc0
[   11.411472] dvb-usb: schedule remote query interval to 500 msecs.
[   11.411476] dvb-usb: Afatech AF9015 DVB-T USB2.0 stick successfully initialized and connected.
[   11.418592] usbcore: registered new interface driver dvb_usb_af9015

Next Step

Install PS3 Remote for Controlling XBMC

# For PS3 BD remote we need to force older, patched Bluetooth stack.
# First make really sure no existing bluetooth package exist

apt-get -y purge bluez 

# Add new repository and force use of Ubuntu 12.04 packages

# on XBMCbuntu 12 (Ubuntu 12.10)

add-apt-repository -y ppa:kitlaan/ppa
sed -i /etc/apt/sources.list.d/kitlaan-ppa-quantal.list -e's/quantal/precise/g'
cat <<'__EOF__' >/etc/apt/preferences.d/bluez
Package: bluez*
Pin: release o=LP-PPA-kitlaan
Pin-Priority: 1000
__EOF__

# Install bluetooth stack

apt-get update
apt-get -y install bluez

# Pairing PS3 remote on Linux
# Grab required software

mkdir -p /opt/ps3pair
cd /opt/ps3pair
wget http://dump.asiantuntijakaveri.fi/le_bueno_dumpo/ps3pair.tar.gz

# or
# wget http://kitlaan.twinaxis.com/projects/bluez-ps3remote/ps3pair.tar.gz

tar xvzf ps3pair.tar.gz
mv ps3pair/* .
rmdir ps3pair

# Start pairing. Press and hold Start+Enter on
# PS3 BD remote for at least 5 seconds to enter pairing mode.

python ps3_pair.py

# You should see something like this:
# Please HOLD the START and ENTER buttons on the PS3 remote.
# Searching for devices, please wait…
# Found:
# 1: 00:06:BF:55:BD:12 [Unknown]
# Select the device you wish to add [1]:
# Registering device… Done

# Linux bluetooth pairing with PS3 remote is broken…
# Pairing does results in proper Linux side configuration, but PS3
# remote side never completes pairing.
#
# To workaround this problem you need to pair same USB bluetooth
# dongle with same PS3 remote on Windows 7. Only then remote is
# properly paired with dongle and also Linux side configuration
# is ok.

# For AR3011 in Windows use driver version 8.0.0.214 from
# http://www.station-drivers.com/page/atheros.htm or from mirror
# http://dump.asiantuntijakaveri.fi/le_bueno_dumpo/atheros_bluetooth_8.0.0.214-w7-8(www.station-drivers.com).exe
#
# Do pairing as with any other bluetooth device on Windows 7 using
# built-in add new device feature. Press and hold Start+Enter on
# PS3 BD remote for at least 5 seconds to enter pairing mode.

# Remove and re-insert batteries on PS3 BD remote to reset it
# after partial pairing attempt with Linux bluetooth stack.

# After pairing is complete both on Linux and Windows side we need
# to create custom input configuration file. This is just one example,
# you probably want different keymap.

# Fix configuration file

cat <<'__EOF__' >/etc/bluetooth/input.conf
[General]
IdleTimeout=180 # 3 minute timeout, shorten to improve battery life
[PS3 Remote Map]
OverlayBuiltin = FALSE
0x16 = KEY_ESC # EJECT
0x64 = KEY_A # AUDIO
0x65 = KEY_Z # ANGLE
0x63 = KEY_T # SUBTITLE
0x0f = KEY_O # CLEAR
0x28 = KEY_I # TIME
0x00 = KEY_1 # NUM-1
0x01 = KEY_2 # NUM-2
0x02 = KEY_3 # NUM-3
0x03 = KEY_4 # NUM-4
0x04 = KEY_5 # NUM-5
0x05 = KEY_6 # NUM-6
0x06 = KEY_7 # NUM-7
0x07 = KEY_8 # NUM-8
0x08 = KEY_9 # NUM-9
0x09 = KEY_0 # NUM-0
0x81 = KEY_S # RED
0x82 = KEY_MUTE # GREEN
0x80 = KEY_VOLUMEUP # BLUE
0x83 = KEY_VOLUMEDOWN # YELLOW
0x70 = KEY_I # DISPLAY
0x1a = KEY_M # TOP MENU
0x40 = KEY_M # POP UP/MENU
0x0e = KEY_ESC # RETURN
0x5c = KEY_C # TRIANGLE/OPTIONS
0x5d = KEY_BACKSPACE # CIRCLE/BACK
0x5f = KEY_TAB # SQUARE/VIEW
0x5e = KEY_SPACE # CROSS
0x54 = KEY_UP # UP
0x56 = KEY_DOWN # DOWN
0x57 = KEY_LEFT # LEFT
0x55 = KEY_RIGHT # RIGHT
0x0b = KEY_ENTER # ENTER
0x5a = KEY_VOLUMEUP # L1
0x58 = KEY_VOLUMEDOWN # L2
0x51 = KEY_MUTE # L3
0x5b = KEY_VOLUMEUP # R1
0x59 = KEY_VOLUMEDOWN # R2
0x52 = KEY_MUTE # R3
0x43 = KEY_HOMEPAGE # PS button
0x50 = KEY_ENTER # SELECT
0x53 = KEY_PLAY # START
0x33 = KEY_R # SCAN BACK
0x32 = KEY_PLAY # PLAY
0x34 = KEY_F # SCAN FORWARD
0x30 = KEY_DOWN # PREVIOUS
0x38 = KEY_X # STOP
0x31 = KEY_UP # NEXT
0x60 = KEY_LEFT # SLOW/STEP BACK
0x39 = KEY_PLAY # PAUSE
0x61 = KEY_RIGHT # SLOW/STEP FORWARD
__EOF__

# Restart bluetooth service

service bluetooth restart

# Now press some button on PS3 BD remote. Blue led on USB bluetooth
# dongle has been solid blue so far and should start flashing.

# To save battery life we need to disconnect PS3 BD remote on
# shutdown and suspend

mkdir -p /opt/bt-disconnect
cd /opt/bt-disconnect
wget http://dump.asiantuntijakaveri.fi/le_bueno_dumpo/bt-disconnect-all.py

# or
# wget http://kitlaan.twinaxis.com/projects/bluez-ps3remote/bt-disconnect-all.py

chmod a+x bt-disconnect-all.py

# Disconnect on shutdown

cat <<'__EOF__' >/etc/rc6.d/K99btdisconnect
#!/bin/sh
date >>/opt/bt-disconnect/log
exec /opt/bt-disconnect/bt-disconnect-all.py >>/opt/bt-disconnect/log 2>&1
__EOF__

# exec bit needed as usual

chmod a+x /etc/rc6.d/K99btdisconnect

# Disconnect on suspend

cat <<'__EOF__' >/etc/pm/sleep.d/bt-disconnect.sh
#!/bin/bash
case $1 in
suspend)
date >>/opt/bt-disconnect/log
/opt/bt-disconnect/bt-disconnect-all.py >>/opt/bt-disconnect/log
;;
resume)
# do nothing
;;
esac
__EOF__

# And finally make it executable

chmod a+x /etc/pm/sleep.d/bt-disconnect.sh

# If you managed to follow instructions your PS3 BD remote can now
# control XBMC.

5.00 avg. rating (93% score) - 1 vote

Posted Under: Linux

About vaheeD

Leave a Reply

Your email address will not be published. Required fields are marked *

Protected by WP Anti Spam